Jump To Section
- SSC JE Last Year cut off
- SSC JE Tentative Exam date
- SSC JE Exam Pattern
- SSC JE Eligibility
- SSC JE form 2020-How to Apply Online
- SSC JE Payscale/Salary after 7th Pay Commission
- SSC JE Result
- SSC JE Syllabus
- SSC JE Helpline
- SSC JE Selection Process
- How to Pass SSC JE Exam
- Frequently Asked Question About SSC JE 2020
Note:- SSC JE 2020 Exam postponed due to COVID 19 coronavirus.
Ssc Je or also known as SSC junior engineer is conducted every year to select quality junior engineers by the staff selection committee for various branches of the government of India.
It is a widely attempted SSC exam among new government job aspirants. Today we are going to cover each and every detail about the SSC JE exam and how to prepare tips. At the end of the article, we also share some study tips which help you to pass the SSC JE exam in the first attempt.
SSC JE exam is conducted to recruit junior engineer for the various government of India posts including:-
- Central Water Organization
- Central Water Commission
- Central Public Works Department
- Department of Posts
- Military Engineer Services
- Farakka Barrage Project
- Border Road Organization
- Central Water and Power Research Station
- Directorate of Quality Assurance
- National Technical Research Organization
SSC JE Last Year cut off
Every year SSC release SSC JE cut off marks which students need cross to get eligible for various SSC JE government vacancy posts.
Here is 2019 SSC JE Cut off divided into different posts and different Reservation Category.
SSC JE Civil Engineering Cut Off 2019
|Category||Tier – I Cut Off||Candidates Available|
|PWD – Others||40.08||30|
SSC JE Electrical/Mechanical Engineering Cut Off 2019
|Category||Tier – I Cut Off||Candidates Available|
|PWD – Others||40.04||30|
You may be amazed at how SSC determined the cut off marks for different categories and different posts for SSC JE. below are some parameters which directly affect the cutt Of mark for SSC JE every year.
- Negative Marking scheme
- SSC JE exam Questions difficulty level
- The caste and reservation category from students belong.
- The score obtained by students that particular region
- Total number of student appeared in the examination
- Total number of Vacancy available in the region.
SSC JE Tentative Exam date
Ssc Je 2020 exam date is not yet fixed or announced by SSC. but we are providing a tentative exam date of SSC JE 2020. Most probably the SSC JE 2020 Exam will be conducted on the following dates.
SSC JE Exam Date 2020 (Tentative)
|SSC JE Notification||August 2020|
|SSC JE Online application||August 4th, 2020 – September 3rd, 2020|
|Paper I (Computer-based exam)||February 2021|
|Paper-II (Conventional)||To be notified|
|Result declaration (Tentative)||To be notified|
SSC JE Exam Pattern
Ssc Je contains two papers, ie paper 1 and paper 2. Paper 1 is conducted in online mode and papers 2 is conducted in offline mode. The candidate will get 2 hours of each paper which consists of a total of 4 Hours.
SSC JE Paper 1 Exam Pattern
Paper 1 is objective and MCQ Type exam whereas paper 2 is descriptive and long answer form type exam.paper 1 marking scheme is done on the basis of negative marking . 0.25 marks are deducted for each wrong answer.
Paper 1 contains 200 MCQ Objective type Questions. candidates who clear paper 1 will be eligible for paper 2 exam.
|Papers||Numbers of Subjects||Number of Questions||Maximum marks||Exam duration|
|Paper I – Objective type||General Intelligence & Reasoning||50 MCQs||50 marks||2 hours|
|General Awareness||50 MCQs||50 marks|
|General Engineering Part A – (Civil & Structural OR Part B (Electrical) OR Part C (Mechanical)||100 MCQs||100 marks|
|Total||3 Subjects||200 MCQs||200 Marks||120 minutes|
SSC JE Paper 2 Exam Pattern
Paper 2 contains a total of 300 marks. Paper 2 is a descriptive type exam and paper 2 doesn’t have any negative marking scheme. Negative Marking Scheme is only applicable to paper 1.
|Paper||Subjects||Maximum marks||Exam duration & time|
|PapePaper-II descriptive Type||Part A – General Engineering (Civil and Structural) OR Part B – General Engineering (Electrical) ORPart C – General Engineering (Mechanical)||300 marks||2 hours|
SSC JE Eligibility
There are various eligibility criteria for the SSC JE exam. Some are based on age, education qualification and some are in respect to citizenship.
SSC JE Age limit
There are some criteria for the age limit for the candidate applying for SSC JE 2020 examination. The age limit candid needs to meet as on 1st January 2020 are as follows for the various posts.
|Posts Name||Departments||SSC JE Upper Age Limit|
|JE Civil||Central Water Commission||Upto 32 years|
|JE Mechanical||Central Water Commission||Upto 32 years|
|JE Civil||CPWD||Upto 32 years|
|JE Electrical||CPWD||Upto 32 years|
|JE Civil||MES||Upto 30 years|
|JE Electrical and Mechanical||MES||Upto 30 years|
|JE Civil||Farakka Barrage Project||Upto 30 years|
|JE Electrical||Farakka Barrage Project||Upto 30 years|
|JE Mechanical||Farakka Barrage Project||Upto 30 years|
|JE Civil||Border Road Organisation||Upto 30 years|
|JE Electrical & Mechanical||Border Road Organisation||Upto 30 years|
|JE Civil||Central Water and Power Research Station||Upto 30 years|
|JE Electrical||Central Water and Power Research Station||Upto 30 years|
|JE Mechanical||Central Water and Power Research Station||Upto 30 years|
|JE Mechanical||Directorate of Quality Assurance (Naval)||Upto 30 years|
|JE Electrical||Directorate of Quality Assurance (Naval)||Upto 30 years|
|JE Civil||NTRO||Upto 30 years|
|JE Electrical||NTRO||Upto 30 years|
|JE Mechanical||NTRO||Upto 30 years|
SSC JE Age Limit Reservation/Relaxation
There is Some Reservation in the upper age limit for SC, SC, and reserved Caste. So if you are from the reservation category then you can get following Age Limit Relaxation.
|Caste Categories||Extra Age Limit Allowed|
|Scheduled Caste/Scheduled Tribe (SC/ST)||5 years|
|Other Backward Class (OBC)||3 years|
|Persons with Disabilities (PwD)||10 years|
|PwD + OBC||13 years|
|PwD + SC/ST||15 years|
|Ex-Servicemen (ESM)||3 years after deduction of the military service rendered from the actual age|
|Candidates who had ordinarily been domiciled in Jammu & Kashmir from 01-Jan-1980 to 31-Dec-1989||5 years|
|Defense personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof||3 years|
|Defence personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof (SC/ST)||8 years|
SSC JE Citizenship Eligibilty
An SSC Je candidate applying for 2020 examination Must be Either:-
- a citizen of India, or
- a subject of Nepal/Bhutan, or
- a Tibetan refugee who came to India before January 1, 1962, with the intention of permanently settling in India
- a person of Indian origin migrated from Pakistan, Burma, Sri Lanka and East African countries of Kenya, Uganda, the United Republic of Tanzania, Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently setting in India
SSC JE Education Qualification Eligibility
There is some education Qualification eligibility you need to fulfill before applying for SSC Exam.below are the educational qualification you need to obtain for SSC JE Different Posts.
|Posts Name||Educational Qualification & Work Experience|
|JE Civil, Central Water Commission||Degree/diploma in Civil Engineering from a recorecognized university/institution|
|JE Mechanical, Central Water Commission||Degree/diploma in Mechanical Engineering from a recognised university/institution|
|JE Civil, Central Public Works Department (CPWD)||Diploma in Civil Engineering from a recognised university/institute|
|JE Electrical, CPWD||Diploma in Electrical/Mechanical Engineering from a recognised university/institute|
|JE Civil, Military Engineer Services (MES)||Degree in Civil Engineering from a recognised UniversityOrThree-year diploma in Civil Engineering from a recognised institute/university/board and two-year experience in planning, execution and maintenance of Civil Engineering works|
|JE Electrical & Mechanical, MES||Degree in Electrical/Mechanical Engineering from a recognised universityOrThree-year diploma in Electrical/Mechanical Engineering from a recognised institute/university/board and two-year experience in planning, execution and maintenance of Electrical/Mechanical Engineering works|
|JE Civil, Farakka Barrage Project||Diploma in Civil Engineering from a recognised university/institute/board|
|JE Electrical, Farakka Barrage Project||Diploma in Electrical Engineering from a recognised university/institute/board|
|JE Mechanical, Farakka Barrage Project||Diploma in Mechanical Engineering from a recognised university/institute/board|
|JE Civil, Border Roads Organisation, Ministry of Defence||Degree in Civil Engineering from a recognised university/instituteOrThree-year diploma in Civil Engineering from a recognised university/institute/board and two-year working experience in planning, execution and maintenance of Civil Engineering works|
|JE Electrical & Mechanical, Border Roads Organisation, Ministry of Defence||Degree in Electrical/Mechanical Engineering from a recognised university/instituteOrThree-year diploma in Electrical/Automobile/Mechanical Engineering from a recognised university/institute/board and two-year experience in planning, execution and maintenance of Electrical/Mechanical Engineering works|
|JE Civil, Central Water Power Research Station||Diploma in Civil Engineering from a recognised institute|
|JE Electrical, Central Water Power Research Station||Diploma in Electrical Engineering from a recognised institute|
|JE Mechanical, Central Water Power Research Station||Diploma in Mechanical Engineering from a recognised institute|
|JE Mechanical, Directorate of Quality Assurance, (Naval)||Degree in Mechanical Engineering from a recognised institute OrThree-year diploma in Mechanical Engineering from a recognised university/institution and two-year experience in the respective field|
|JE Electrical, Directorate of Quality Assurance, (Naval)||Degree in Electrical Engineering from a recognised University OrThree-year diploma in Electrical Engineering from a recognised university/institution and two-year experience in the respective field|
|JE Civil, National Technical Research Organisation (NTRO)||Diploma in Civil Engineering from a recognised university/institution|
|JE Electrical, NTRO||Diploma in Electrical Engineering from a recognised university/institution|
|JE Mechanical, NTRO||Diploma in Mechanical Engineering from a recognised university/institution|
SSC JE form 2020-How to Apply Online
1. Log in to the online system through your Registration Number and password
2. Click the „Apply‟ link in „Junior Engineer (Civil, Mechanical, Electrical, and Quantity Surveying & Contracts) Examination 2019‟ Section under the „Latest Notifications‟ tab.
3. Information in columns at S No-1 to 14 will be automatically filled from your One-time Registration Data which is non-editable.
4. S No-15: Give your preference for Examination Centers. You may choose examination Centers within the same Region. The choice for all three Centers must be given in the order of preference.
5. S No-16: If you are an ex-serviceman, fill up the required information. Wards of servicemen/ ex-servicemen are not treated as ex-servicemen.
6. S No-17: If you are eligible for availing the facility of the scribe as per Para-9.2 of the Notice of examination, provide information about the requirement of the scribe.
7. S No-18: If you are seeking age relaxation, select an appropriate age-relaxation category.
8. S No-19: Select the post you wish to apply.
9. S No-20: Indicate your highest technical qualification relevant to the post and Stream/ Subject of technical qualification.
10. S No-21: If you belong to Economically Weaker Section (EWS), click on „Yes‟, else „No‟. This is applicable for only un-reserved candidates.
11. S No-22: Please see Notice of Examination, Para No: 20 and, fill up accordingly.
12. S No-23 & 24: Information about your Postal Address and Permanent Address will be automatically filled from the One-time Registration data.
13. Your Photo and Signature will be automatically fetched from the One-time Registration Data.
14. Go through the undertaking you need to give for appearing in the examination and if you agree, click on “I agree” checkbox and fill up Captcha code.
15. Preview and verify the information provided by you and submit the Application.
16. Proceed to make fee payment if you are not exempted from payment of a fee.
17. Fee can be paid through BHIM UPI, SBI Challan/ Net Banking or by using Visa, Mastercard, Maestro, RuPay Credit or Debit cards or in cash at SBI Branches by generating SBI Challan.
18. Refer Para-10 of the Notice of Examination for further information on the payment of a fee.
19. When the application is successfully submitted, it will be accepted ‘Provisionally’. Candidates must take a printout of the application form for their own records. Normally, a printout of the ‘Application Form’ is not required to be submitted to the Commission at any stage. However, if there is any discrepancy in the data, a copy of the printout may be demanded by the Commission.
SSC JE Payscale/Salary after 7th Pay Commission
No doubt payscale is one of the major and important factors of any job whether its government job or private job. While talking about pay the scale of SSC JE Post. it depends on the post and department you got selected for.
We have Categorized SSC JE Payscale Based on the various below Parameters.
SSC JE Salary After 7th Pay Commission
|Name of Organization||Name of Post||SSC JE Salary|
|Border Roads Organization, Ministry of Defence||Junior Engineer (Civil)||Rs 35400-112400/-|
|Central Public Works Department (CPWD)||Junior Engineer (Civil)||Rs 35400-112400/-|
|Central Public Works Department (CPWD)||Junior Engineer (Electrical)||Rs 35400-112400/-|
|Central Water Commission||Junior Engineer (Civil)||Rs 35400-112400/-|
|Central Water Commission||Junior Engineer (Mechanical)||Rs 35400-112400/-|
|Central Water Power Research Station||Junior Engineer (Civil)||Rs 35400-112400/-|
|Central Water Power Research Station||Junior Engineer (Mechanical)||Rs 35400-112400/-|
|Directorate of Quality Assurance, Naval||Junior Engineer (Electrical)||Rs 35400-112400/-|
|Directorate of Quality Assurance, Naval||Junior Engineer (Mechanical)||Rs 35400-112400/-|
|Farakka Barrage Project||Junior Engineer (Civil)||Rs 35400-112400/-|
|Farakka Barrage Project||Junior Engineer (Electrical)||Rs 35400-112400/-|
|Farakka Barrage Project||Junior Engineer (Mechanical)||Rs 35400-112400/-|
|Military Engineer Services (MES)||Junior Engineer (Civil)||Rs 35400-112400/-|
|Military Engineer Services (MES)||Junior Engineer (Electrical & Mechanical)||Rs 35400-112400/-|
|Military Engineer Services (MES)||Junior Engineer (Quantity Surveying & Contracts)||Rs 35400-112400/-|
SSC JE Result
Due to the corocoronavirus outbreak, SSC JE result has been delayed. SSC commission will soon Announce ssc je result date. Earlier it was scheduled for April 9 2020.
Along with the SCC JE result commission also announce SSC JE cut off marks and answer key for the same.
Steps to check SSC JE 2020 Result.
- Visit SSC official website on ssc.nic.in
- Click on result tab
- Click on JE TAB
- Then click on Result LINK
- After that, it will ask you to enter SSC JE Roll Number
- After that Click View and Save the result
If your name doesn’t appear in the list you saved then you haven’t cleared the SSC JE exam. Try next time harder.
SSC JE Syllabus
SSC JE Paper-I Syllabus
(i) General Intelligence & Reasoning: general intelligence and reasoning include two types one is verbal and another nonverbal segment.
This Part Include:-
- differences, space visualization,
- problem solving,
- decision making,
- visual memory,
- relationship concepts,
- arithmetical reasoning,
- verbal and figure classification,
- arithmetical number series etc.
General awareness and reasoning is designed to test the student’s awareness and reasoning ability and comprehension skill. So be focused to develop your general awareness and problem solving skill.
(ii) General Awareness: this part includes overall testing of student’s knoweldge and awareness about environment and surroundings. General awwareness question are designed to test the candidates . for this part student need not study any particular subject. It requires all subjects general ability including history, culture, environment, etc.
(iii) General Engineering (Civil and Structural), (Electrical & Mechanical):
Part Civil Engineering
- Building Materials,
- Estimating, Costing and Valuation,
- Surveying, Soil Mechanics,
- Hydraulics, Irrigation Engineering,
- Transportation Engineering,
- Environmental Engineering.
- Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.
Syllabus of electrical engineering is as follows. It includes various topics and chapter related electrical engineering you study in your academic.
- Basic concepts,
- Circuit law,
- Magnetic Circuit,
- AC Fundamentals,
- Measurement and Measuring instruments,
- Electrical Machines,
- Fractional Kilowatt Motors and single phase induction Motors,
- Synchronous Machines,
- Transmission and Distribution,
- Estimation and Costing,
- Utilization and Electrical Energy,
- Basic Electronics.
Below are the chapter wise syllabus of mechanical enginneer paper of ssc je exam
- Theory of Machines and Machine Design,
- Engineering Mechanics and Strength of Materials,
- Properties of Pure Substances,
- 1st Law of Thermodynamics,
- 2nd Law of Thermodynamics
- Air standard Cycles for IC Engines,
- IC Engine Performance,
- IC Engines Combustion,
- IC Engine Cooling & Lubrication,
- Rankine cycle of System, Boilers,
- Classification, Specification,
- Fitting & Accessories,
- Air Compressors & their cycles,
- Refrigeration cycles,
- Principle of Refrigeration Plant,
- Nozzles & Steam Turbines.
- Properties & Classification of Fluids,
- Fluid Statics,
- Measurement of Fluid Pressure,
- Fluid kinematics,
- Dynamics of Ideal fluids,
- Measurement of Flow rate,
- basic principles,
- Hydraulic Turbines,
- Centrifugal Pumps,
- Classification of steels.
SS JE Paper II Syllabus
Subject:- Building Materials
- Physical and Chemical properties,
- standard tests,
- uses and manufacture/quarrying of materials e.g. building stones, silicate-based materials, cement (Portland),
- asbestos products,
- timber and wood-based products,
- bituminous materials,
- paints, varnishes.
Subject:- Estimating, Costing and Valuation
- glossary of technical terms,
- analysis of rates,
- methods and unit of measurement,
- Items of work – earthwork,
- Brick work (Modular & Traditional bricks),
- RCC work, Shuttering,
- Boundary wall, B
- rick building,
- Water Tank,
- Septic tank,
- Bar bending schedule,
- Centre line method,
- Midsection formula,
- Trapezoidal formula,
- Simpson’s rule.
- Cost estimate of Septic tank,
- flexible pavements,
- Tube well,
- isolates and combined footings,
- Steel Truss,
- Piles and pile-caps.
- Valuation – Value and cost,
- scrap value, salvage value,
- assessed value,
- sinking fund,
- depreciation and obsolescence,
- methods of valuation.
- Principles of surveying
- , measurement of distance,
- chain surveying,
- working of prismatic compass,
- compass traversing,
- local attraction,
- plane table surveying,
- theodolite traversing,
- adjustment of theodolite,
- Definition of terms
- used in levelling,
- curvature and refraction corrections,
- temporary and permanent adjustments of dumpy level,
- methods of contouring,
- uses of contour map,
- tachometric survey,
- curve setting,
- earth work calculation,
- advanced surveying equipment.
Subject:- Soil Mechanics
- Origin of soil,
- phase diagram,
- Definitions-void ratio,
- degree of saturation,
- water content,
- specific gravity of soil grains,
- unit weights,
- density index and interrelationship of different parameters,
- Grain size distribution curves and their uses.
- Index properties of soils,
- Atterberg’s limits,
- ISI soil classification and plasticity chart.
- Permeability of soil,
- coefficient of permeability,
- determination of coefficient of permeability,
- Unconfined and confined aquifers,
- effective stress,
- quick sand,
- consolidation of soils,
- Principles of consolidation,
- degree of consolidation,
- preconsolidation pressure,
- normally consolidated soil,
- e-log p curve,
- computation of ultimate settlement.
- Shear strength of soils,
- direct shear test,
- Vane shear test,
- Triaxial test.
- Soil compaction,
- Laboratory compaction test,
- Maximum dry density and optimum moisture content,
- earth pressure theories,
- active and passive earth pressures,
- Bearing capacity of soils,
- plate load test,
- standard penetration test.
- Fluid properties,
- measurements of flow,
- Bernoulli’s theorem and its application,
- flow through pipes,
- flow in open channels,
- pumps and turbines.
- Irrigation Engineering:Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation,
- Hydrology – Measurement of rainfall, runoff coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc.
- Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies.
- Different types of canals, types of canal irrigation, loss of water in canals.
- Canal lining – types and advantages.
- Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity.
- Lacey’s theory of uniform flow.
- Definition of flood, causes and effects, methods of flood control, water logging, preventive measure.
- Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes.
- Major irrigation projects in India.
Subject:- Transportation Engineering
- cross sectional elements,
- geometric design,
- types of pavements,
- pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM),
- Gravel Road,
- Bituminous construction,
- Rigid pavement joint,
- pavement maintenance,
- Highway drainage,
- Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards.
- Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.
- Quality of water,
- source of water supply,
- purification of water,
- distribution of water,
- need of sanitation,
- sewerage systems,
- circular sewer,
- oval sewer,
- sewer appurtenances,
- sewage treatments.
- Surface water drainage. Solid waste management – types, effects, engineered management system.
- Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.
- Structural Engineering
Theory of structures:
- Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and overhanging beams.
- Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
- Advantages and uses of concrete,
- cement aggregates,
- importance of water quality, water cement ratio,
- mix design,
- finishing and curing of concrete,
- quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
- RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and doubly reinforced beams, cantilever beams.
- T-beams, lintels.
- One way and two way slabs, isolated footings.
- Reinforced brick works,
- retaining wall,
- water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
- Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.
Part-B (Electrical Engineering):
Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Circuit law : Kirchhoff’s law, Simple Circuit solution using network theorems. Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.
AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal waveform, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Polyphase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges.
Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications.
Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.
Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults.
Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution systems, comparison of conductor materials, efficiency of different systems. Cable – Different type of cables, cable rating and derating factor.
Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.
Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.
Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.
Part- C (Mechanical Engineering):
Theory of Machines and Machine Design:-
Concept of a simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.
Engineering Mechanics and Strength of Materials
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Buckling of columns –Euler’s and Rankin’s theories, Thin walled pressure vessels.
Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Mollier’s Chart).
1st Law of Thermodynamics :
Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.
2nd Law of Thermodynamics :
Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.
Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.
Boilers:- Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.
Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines
Fluid Mechanics & Machinery
Properties & Classification of Fluid : ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.
Fluid Statics : Pressure at a point.
Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube.
Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.
Dynamics of ideal fluids : Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.
Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter.
Hydraulic Turbines : Classifications, Principles.
Centrifugal Pumps : Classifications, Principles, Performance.
Classification of Steels: mild steel & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.
SSC JE Helpline
If you are getting stuck or have any doubts regarding any SSC JE then you can contact SSC Je helpline by staff selection commission. SSC has declared various helplines depends upon your regional of the exam.
Below are the Region Wise helpline for SSC.
You can visit SSC Helpline Number here too- https://ssc.nic.in/Portal/RegionalNetwork
SSC JE Selection Process
- Fill the application form
The first step towards SSC JE is to fill up application form issued by the Staff selection committee. Every eligible candidate should fill-up the form through different modes assigned by SSC every year.
Fill up the SSC JE application form on the SSC official website with email, phone number, and other detail required by SSC. And do not forget to keep 1 copy of your successful form filled up.
- Preliminary exam paper 1
The second step after filling application form is to prepare and attend a preliminary exam or paper 1 of SSC JE.we already shared all the detail about paper 1 of SSC JE above including syllabus and chapter-wise detail. Its MCQ or objective type question-based exam and contains negative marking for wrong answers.
- Mains exam paper 2
After passing paper 1 of SSC JE candidate need to appear in SSC JE mains or paper 2 exam its descriptive type exam. It doesn’t contain any negative marking.
- Document verification
After clearing paper 1 and paper 2 successfully student need to go through document verification process. A document like academic qualification, identity verification happens in this process.
- Medical examination
After completing document verification students need to go through medical verification so that they are physically fit for SSC JE posts.
- Allotment of post or appointment phase
After completing medical verification candidate are allowed posts or allowed joining later for their respective applied job.
How to Pass SSC JE Exam
Every year, the SSC or Staff Selection Commission carries out the SSC JE exam, mainly for recruiting newer and eligible candidates for various available posts. Some of these posts are related to numerous engineering departments including electrical, mechanical, and civil and the like.
The SSC JE exam is carried out in two different phases – the first one being an objective-type of test whereas the second one is a subjective-type of the exam.
The first phase will contain subjects such as General Awareness, General Intelligence & Reasoning and General and Engineering.
The second phase contains subjects such as General Engineering. Since a course like this takes a lot of practice, patience, focus, and study, in this article we’ll be sharing some of the best tips to pass the SSC JE exam.
1. Always Go Through the Syllabus First
It’s quite essential to first know each topic that is covered in the syllabus, which is why candidates need to first research about the exam syllabus and lay down the plans for studying. For the best way to pass SSC JE exam, it’s suggested that candidates should always give more weightage towards chapters or sections that carry more marks as more questions will be asked from the same.
2. Keep the Time Allocation Of The Exam Questions
It should be noted that the phase one part of the SSC JE exam contains about 200 questions, which needs to be completed within two hours. There is both the technical part as well as the non-technical questions.
It’s recommended that to pass the SSC JE exam students must finish the non-technical questions first and then try spending time on the technical questions.
Each question needs to be completed within half-a-minute, which means that students have to be very fast in answering all of them.
3. Practice SSC JE Mock Tests
Before students appear for the actual exam, it’s suggested that they should practice mock tests which will help in optimizing their time for answering the questions – ultimately helping them to pass the SSC JE exam. Depending on the question difficulty along with its complexity, it will help students know how much time they’re spending on each question and how that time could be lowered much more.
4. Learn To Solve All Types Of Questions
To succeed in an exam like this, students need to learn to tackle various kinds of questions, which is why practising lots of mock test questions will do the trick.
It’s suggested that students should always start with the questions that are more time consuming and gradually move towards the easier ones. Solving difficult problems is one of the best ways to pass the SSC JE exam as it will help the candidates enjoy greater self-confidence.
5. Create A Time Table For The Exam Preparation
In case students are thinking about how to study for the SSC JE exam, then the first step that needs to be taken is to create a strict timetable for your preparation.
Candidates should be open to modifying the timetable as required later on during the preparation course. More time should be allocated toward difficult chapters and questions.
6. Reading Habits Should Be Developed
Each day, students should allocate some part of their studying time towards reading newspapers, magazines that deal with current affairs, different types of engineering books, and so on.
Candidates should always keep themselves updated with all the significant events that are happening in the country, especially the last six months to one year. Such reading habits will come in useful during the personal interview recruitment round.
7. Clearing The Basics And Make Revision Notes
If candidates are planning to pass the SSC JE exam in the first attempt, then it’s important to first study the theory behind the concept and then clear out all the basics.
Learning the basics will help the students get an in-depth idea of the same and each concept will be engraved in the minds of the candidates. Moreover, students need to make their revision notes for each chapter, so that the day before the exam, it becomes easy to revise.
8. Ensure To Go Through Past Year Exam Papers
Apart from practicing mock tests regularly, students should also go through past year exam papers and thereby practice them within the stipulated time. It’s recommended that students should try to master the topics that have more weightage than the others.
Going through the past five or ten-year question papers will be enough to get a grip on how the exam takes place and what type of questions are asked. Furthermore, questions are often repeated from previous terms as well.
9. Keep A Note Of The Important Formulas
Learning formulas are just as important as learning theory subjects, especially for the technical subjects where you need to apply shortcuts to get the answer in less time.
The best way to go about this issue is to not only learn the formulas but also note them down into a notebook for the record.
Such a record can be revised anytime before the exams or while practicing questions, which will help in generating a better grip over the syllabus.
10. Improve Writing Skills
It should be remembered that the SSC JE examinations not only consist of objective questions but subjective questions too (in phase two). One of the main reasons why most students fail at this exam is because they have poor writing skills.
Therefore, when writing subjective answers, having good writing skills and presentation is a must. To do this, short notes must be taken regularly and candidates should also attend online lectures on the exam topics, if possible.
Passing the SSC JE exam can turn out to be not so difficult if students can follow the above tips to pass the SSC JE exam, in their entirety. Since these types of exams are very competitive, without having a good preparation of the subjects it can turn to be pretty difficult to pass them.
Candidates need to spend time and energy on each subject specifically because not one chapter can be overlooked. Moreover, each concept should be clear in the minds of the reader.
Frequently Asked Question About SSC JE 2020
Minimum qualification depends upon the posts you applied. However concerning the JE posts you need to have BTEC OR BE Degree.
SSC Contains 2 Paper. Paper 1 is conducted through online mode and paper 2 is conducted through offline mode.
SSC JE exam is conducted once a year.
Ssc je paper 1 exam duration is 2 hours or 120 Minutes.
Ssc je paper 2 exam has also duration of 2 hours or 120 Minutes.
SSC JE salary after 7th pay commission falls between 40000 to 70000 depends upon the post and various benefits like TA, DA an Others.
It depends upon student to student. Some find SSC JE exam tough. Some find SSC JE exam moderate. But SSC JE is not an easy exam to clear. So you need to Prepare seriously for the SSC JE Exam.